The Reductive Dehydration of Cellulose by Solid/Gas Reaction with TiCl4 at Low Temperature: A Cheap,Simple, and Green Process for Preparing Anatase Nanoplates and TiO2/C Composites

Metal oxides and metal oxide/carbon composites are entering the development of new technologies and should therefore to be prepared by sustainable chemistry processes. Therefore, a new aspect of the reactivity of cellulose is presented through its solid/gas reaction with vapour of titanium(IV) chloride in anhydrous conditions at low temperature (80 °C). This reaction leads to two transformations both for cellulose and titanium(IV) chloride. A reductive dehydration of cellulose is seen at the lowest temperature ever reported and results in the formation of a carbonaceous fibrous solid as the only carbon‐containing product. Simultaneously, the in situ generation of water leads to the formation of titanium dioxide with an unexpected nanoplate morphology (ca. 50 nm thickness) and a high photocatalytic activity. We present the evidence showing the evolution of the cellulose and the TiO₂ nanostructure formation, along with its photocatalytic activity. This low‐temperature process avoids any other reagents and is among the greenest processes for the preparation of anatase and also for TiO₂/carbon composites. The anisotropic morphology of TiO₂ questions the role of the cellulose on the growing process of these nanoparticles.     

Novel titanate nanotubes-cyanocobalamin materials: Synthesis and enhanced photocatalytic properties for pollutants removal

New hybrid nanomaterials, with improved photocatalytic performance in pollutants removal, were obtained through the modification of titanate nanotubes (TNT) with a cobalt porphyrin, the cyanocobalamin, also knowing as vitamin B12 (B12). The nanocrystalline TNT were produced by hydrothermal treatment and after treated with cobalamin to produce B12-TNT materials. The characterization of the new hybrid material was performed by XRD, FTIR, TEM-EDS, DRS, XPS and ICP. The results show that the immobilization of the cobalt containing specie is dependent on the point of zero charge of the TNT and no modifications on the structure and morphology were observed. No significant changes in the optical band gap were observed after B12 incorporation, but an increasing in the visible light absorption, which arises from charge transfer and d–d transitions of the cobalt, was visualized. The samples photocatalytic performance was studied for the hydroxyl radical production and the highest catalytic ability was achieved by the B12-HTNT sample. The catalytic ability of these new hybrid nanomaterials for two model pollutants photodegradation, phenol and rhodamine B (RhB) was investigated. For both pollutants, the best results were achieved using B12-HTNT with a removal of 94% of a 10 ppm RhB and 87% of a 20 ppm phenol solution in 90 min of irradiation (150 mL, 0.2 g catalyst/L).     

Domino Radical Addition/Oxidation Sequence with Photocatalysis: One‐Pot Synthesis of Polysubstituted Furans from α‐Chloro‐Alkyl Ketones and Styrenes

A new domino reaction has been developed that allows the combination of styrenes and α‐alkyl ketone radicals to afford a wide array of polysubstituted furans in good to excellent yields under mild and simple reaction conditions. The key to success of this novel protocol is the use of photocatalyst fac‐Ir(ppy)₃ and oxidant K₂S₂O₈. Mechanistic studies by a radical scavenger and photoluminescence quenching suggest that a radical addition/oxidation pathway is operable.     

Self‐assembly of metal–organic framework thin films containing metalloporphyrin and their photocatalytic activity under visible light

With [5,10,15,20‐tetra(4‐carboxyphenyl)porphyrin]Mn(III) and sterically controlled 2,2¢‐dimethyl‐4,4¢‐pyridine as the main raw materials, metal–organic framework thin films containing metalloporphyrin (MnPor‐MOF) with catalytically active sites were built up on functionalized quartz glass surfaces using a layer‐by‐layer self‐assembly method. Retaining active catalytic sites and having a porous reticular structure, the MnPor‐MOF films possessed remarkable photocatalytic activity for oxidative degradation of methylene blue in the presence of hydrogen peroxide under visible‐light irradiation. Most meaningfully, the MnPor‐MOF films were highly stable and simply and conveniently reusable, and are thus a potentially new organic material for photocatalytic wastewater treatment. Copyright © 2015 John Wiley & Sons, Ltd.     

Monocrystalline ZnSe as an ionising radiation detector operated over a wide temperature range

This work presents an analysis of the main requirements for semiconductor detectors of ionising radiation that can be operated over a wide temperature range. The analysis shows that wide-gap semiconductors with a band gap greater than 2.0 eV are a better option for effective detection of ionising radiation at high temperatures. The results of an experimental investigation into the luminescent, electrical and spectrometric properties of the wide-gap semiconductor ZnSe are shown as an example. Undoped monocrystalline ZnSe has an extremely low leakage current over a wide range of temperatures up to 167 °C and can be used as a radiometric X-ray detector in pulse-counting mode over a wide temperature range up to at least 130 °C.     

Dephosphatation under UV light of water by Ti-PILC with activation by secondary species (La,Se, and Rb)

Me/Ti-PILC catalysts (Me: La, Se, Rb) were prepared with 60% in weight of Ti-species and 3% in weight of Me-secondary species added under ultrasounds. All materials were characterized by XRF, XPS, XRD, BET, HR-TEM/EDS, FEG-SEM and UV-vis. Three kinds of Ti-oxide nanoparticles were identified: (1) Ti-pillars within the clay layers, (2) rutile nanoflowers, and (3) anatase. In UV-vis spectra, no significant change in the band-gap was observed. In La and Se samples, small variations of the anatase XRD lines are associated with cationic diffusion after deposition of secondary species and calcination. An O1s XPS-peak (533.5 eV) is attributed to oxygen vacancies generated by this diffusion. Phosphate photo-removal in water was studied using phosphoric acid solution (75.97 g L⁻¹). Dephosphatation is significantly improved in the presence of Me-species as La/Ti-PILC > Se/Ti-PILC > Rb/Ti-PILC > Ti-PILC. Partial dephosphatation by adsorption is possible in the dark but is strongly improved by UV irradiation. With a La catalyst and under UV irradiation, phosphates (6.6 × 10⁻³ mol L⁻¹) were recovered in less than 70 min. Therefore, Me/Ti-PILC have a great potential as photocatalysts for the treatment of wastewaters and the recovery of phosphates.     

Semiconductor Photocatalysis—Mechanistic and Synthetic Aspects

Preceding work on photoelectrochemistry at semiconductor single‐crystal electrodes has formed the basis for the tremendous growth in the three last decades in the field of photocatalysis at semiconductor powders. The reason for this is the unique ability of inorganic semiconductor surfaces to photocatalyze concerted reduction and oxidation reactions of a large variety of electron‐donor and ‐acceptor substrates. Whereas great attention was paid to water splitting and the exhaustive aerobic degradation of pollutants, only a small amount of research also explored synthetic aspects. After introducing the basic mechanistic principles, standard experiments for the preparation and characterization of visible light active photocatalysts as well as the investigation of reaction mechanisms are discussed. Novel atom‐economic C? C and C? N coupling reactions illustrate the relevance of semiconductor photocatalysis for organic synthesis, and demonstrate that the multidisciplinary field combines classical photochemistry with electrochemistry, solid‐state chemistry, and heterogeneous catalysis.